Operating Procedure for Veneer Combined Peeling and Clipping Machine Latvija

If you've recently acquired or are considering purchasing a veneer peeling and clipping combined machine, understanding its operation is essential. Here are step-by-step instructions to guide you through the process:

Prepare the Machine:

Close all circuit breakers and ensure all switches are in the off position.

Turn on the general switch to supply power to the machine.

Start the Machine:

Press the "Run" button to initiate the machine's operation.

On the touch screen interface, press the "Start" button to begin the startup process.

Wait for approximately 60 seconds for the power indicator light to turn on, indicating that the machine has entered the start state.

Set Blade Position:

‍

Adjust the "Press blade" knob to the "Tight" position to ensure proper pressure.

Reset the blade position by clicking on the "Back to zero interface" and selecting "Start knife rest back to zero". The knife rest will automatically return to the zero position.

After completing the operation, the knife rest will move forward and stop at the 100 mm position.

Initiate Peeling Process:

Once the log is fed into the machine, press the "Roller start" button to activate the transmission shaft.

Click on "Cutting knife zero returning start" on the touch screen interface to prepare for peeling.

Press the "Start peeling" button to begin the automatic peeling process.

Adjust Blade Carriage Position:

Utilize the "blade carriage forward" and "blade carriage backward" buttons to adjust the position of the blade carriage as needed during the peeling process.

Set Cutting Feeding Mode:

Set the "Cut feeding" knob to the "Auto" position for automatic cutting and feeding of the veneer.

To stop the peeling process, simply adjust the knob to the "Stop Peeling" position.

Following these steps will ensure smooth operation of your veneer peeling and clipping combined machine, allowing you to efficiently produce high-quality veneer products. Always refer to the machine's manual for specific instructions and safety guidelines.